Updating kitchen cabinet doors Hamilton naughty free no sign up chat

27-Jul-2019 04:05

This is the molding I used to hide the raw edges: I purchased it at Home Depot.

It took four 5/16″ X 11/16″ X 8′ pieces at .48 a piece to complete both door panels.

Then stick around and let’s see what else we can get ourselves into!

Your kitchen cabinet doors are the most important part of your kitchen cabinets. A lot of kitchen remodeling can be done by simply resurfacing your kitchen cabinet doors.

If you are using real glass, skip to the installation.

I loved the idea of using plexiglass, also known as Acrylic Plastic Sheeting.

For a very quick remodeling project, and an inexpensive project to do, you can either repaint, or add wallpaper to your cabinet doors.

If you're visiting me for the first time, start with my DIY Project Gallery, found by clicking the tab next to 'Home'.I had already primed and painted the interior of the cabinet: I also replaced the previous shelves that were sagging and drilled new holes for my new shelf pegs, so it would all be fresh and new!I LOVE the result: I touched up the corners of the trim with a little paintable window and door caulk.After I got my measurements, I cut the plexiglass using the plastic sheet cutter, and a yard stick as a straight edge.Just score the sheeting the appropriate number of times for the depth of the sheeting. Then I just lined it up against the edge of my table and snapped it right off. For glass, you will need a silicone for glass as the one I purchased specified “plastic”. Add a bead of silicone along the inside edge on the front side of the cabinet door: Drop the glass/plexi in place on top…

If you're visiting me for the first time, start with my DIY Project Gallery, found by clicking the tab next to 'Home'.

I had already primed and painted the interior of the cabinet: I also replaced the previous shelves that were sagging and drilled new holes for my new shelf pegs, so it would all be fresh and new!

I LOVE the result: I touched up the corners of the trim with a little paintable window and door caulk.

After I got my measurements, I cut the plexiglass using the plastic sheet cutter, and a yard stick as a straight edge.

Just score the sheeting the appropriate number of times for the depth of the sheeting. Then I just lined it up against the edge of my table and snapped it right off. For glass, you will need a silicone for glass as the one I purchased specified “plastic”. Add a bead of silicone along the inside edge on the front side of the cabinet door: Drop the glass/plexi in place on top…

In some of these close-ups, you can see a bunch of tiny white dust particles.